Exploring Assessment Validation: Steps to Validate Assessments
Exploring Assessment Validation: Steps to Validate Assessments
Blog Article
Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.
Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards require RTOs to perform two types of validation.
The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.
Defining the Two Types of Assessment Validation
The Fundamentals of Assessment Validation
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.
For this piece, our emphasis will be on assessment tool validation.
Methods for Conducting Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
When Assessment Tool Validation Should Be Done
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:
- update your resources
- when new training products are added on scope
- course is reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment
ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.
Determining Training Products for Validation
It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.
Key Resources for Assessment Tool Validation
Teaching Materials
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.
Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Panel for Validation
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
Your validation panel must, as a group, possess:
Relevant vocational competencies and industry skills for the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its updated version
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Does the assessment process provide equal opportunity and access to everyone?
Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?
Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Key Rules
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool verifying that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Be Consistent with Your Teachings
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
changing diapers
prepare bottles, feed infants from bottles, and clean equipment
prepare solid foods and feed infants
respond suitably to baby signs and cues
prepare infants for sleep and settle them
monitor and encourage suitable physical exploration and gross motor skills for the age
Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?
Possible answers could include:
Essential resources
Relevant costs
Time span of activities
Appointed duties and responsibilities
When an assessment item calls for several answers, indicate the number of answers required from a student. This way, your assessment remains reliable, and the evidence collected is valid.
This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:
Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolation of the work area, engineering, personal protective equipment
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolation, use of engineering controls, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolating, engineering, administration
Equipment or machinery – isolation, engineering controls, administration
Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. check here This affects your compliance history, so it's better to take a safe and compliant approach.